Technology Introduction Video

PRODUCT

Bio Shield, Inc. engineered our Any Light Responsive (ALR) primer  technology to manipulate the wavelength from any light source into the perfect power plant for photocatalytic reactivity. NuTiO(tm) ALR is a series of microscopic embedded prism like transparent elements that make up our light collection bed.

The collectors absorb unnecessary light and refract (increase) the low spectrum UV-C, UV-B and lower UV-A band gap of energy up and  simultaneously reduces (lower) the upper band gap of energy available in white light (visible light) down into the ideal 380nm range with superior self cleaning properties as low as 12 foot candle power for complete oxidation.


NuTiO(tm) PRO 
NATURAL SERIES

Photo-Active (Photocatalyst) 2.89% top coating for use inside and out.


Interior Solutions:

  • Protects Interior Surfaces
  • Enhances Air Quality (IAQ)
  • Eliminates Odor
  • Provides Touch-Point Protection
  • Eliminates VOCs
  • Removes NOx and SOx from the Air 
    Use on Showers, Tiles, Walls, Toilets, Kitchens, Laundry Areas, Living Areas, Windows, Touch-Points, HVAC Systems, Furniture, Clothing, Ceilings, Smoking Areas, Flooring, Seating and more..

Exterior Solutions:

  • Self Cleaning
  • UV Fade Resistant
  • Anti- Water Stain
  • Anti-Fog
  • Anti-Soiling
  • Reduce Atmospheric Pollution 
  • Reduce GREEN HOUSE Gases
  • Removes (O3) OZONE
  • Eliminates Bio-Film
  • Reduce Maintenance Cost
    Use on Metal, Glass, Wood, Aluminum, Fiberglass, Gel-Coated, Tile, Stone, Brick, Paint, Stucco, Plastic, Decking, Block, Concrete, Swimming Pools, Hot Tubs and more.

Transportation Solutions:

  • Air Purification
  • Deodorization
  • Self-Cleaning
  • Paint Protection
  • Rust Prevention
    Use on Cars, Trucks, Buses, Trains, Airplanes, RV's, Travel Trailers, Motorcycles, Vans, Subway Cars, Boats and more.
For more information, please leave your name and contact information.

First Name:
 *
Last Name:
 *
Email Address:
 *
Telephone Number:
State:
 *
Country
 *
Comments:
 *
Security code:
 *
Do not enter anything in this field:
* indicates a required field

 

Titanium dioxide
IUPAC name Titanium dioxide
Titanium(IV) oxide
Other names Titania
Rutile
Anatase
Brookite
Identifiers
CAS number 13463-67-7
RTECS number XR2775000
Properties
Molecular formula TiO2
Molar mass 79.87 g/mol
Appearance White solid
Density 4.23 g/cm3
Melting point

1870 °C (3398 °F)

Boiling point

2972 °C (5381.6 °F)

Solubility in other solvents Insoluble
Thermochemistry
Std enthalpy of
formation
ÄfHo298
−944 kJ/mol
Hazards
EU classification not listed
NFPA 704

0
1
0
Flash point non-flammable
Related Compounds
Other cations Titanium(II) oxide
Titanium(III) oxide
Titanium(III,IV) oxide
Zirconium dioxide
Hafnium dioxide
Except where noted otherwise, data are given for
materials in their
standard state
(at 25 °C, 100 kPa)

Infobox disclaimer and references

Titanium dioxide, also known as titanium(IV) oxide or titania, is the naturally occurring oxide of titanium, chemical formula TiO2. When used as a pigment, it is called titanium white, Pigment White 6, or CI 77891. It is noteworthy for its wide range of applications, from paint to sunscreen to food colouring.

Contents

Natural occurrence

Titanium dioxide occurs in four forms:

Titanium dioxide occurrences in nature are never pure; it is found with contaminant metals such as iron. The oxides can be mined and serve as a source for commercial titanium. The metal can also be mined from other minerals such as ilmenite or leucoxene ores, or one of the purest forms, rutile beach sand.

Production

Crude titanium dioxide is purified via titanium tetrachloride in the Chloride process. In this process, the crude ore (containing at least 90% TiO2) is reduced with carbon, oxidized with chlorine to give titanium tetrachloride. This titanium tetrachloride is distilled, and re-oxidized with oxygen to give pure titanium dioxide.[1]

Another widely used process utilizes ilmenite as the titanium dioxide source, which is digested in sulphuric acid. The by-product iron(II) sulphate is crystallized and filtered-off to yield only the titanium salt in the digestion solution, which is processed further to give pure titanium dioxide.

Applications

Titanium dioxide is the most widely used white pigment because of its brightness and very high refractive index (n=2.4), in which it is surpassed only by a few other materials. When deposited as a thin film, its refractive index and colour make it an excellent reflective optical coating for dielectric mirrors and some gemstones, for example "mystic fire topaz". TiO2 is also an effective opacifier in powder form, where it is employed as a pigment to provide whiteness and opacity to products such as paints, coatings, plastics, papers, inks, foods, medicines (i.e. pills and tablets) as well as most toothpastes. Used as a white food colouring, it has E number E171. In cosmetic and skin care products, titanium dioxide is used both as a pigment and a thickener. It is also used as a tattoo pigment and styptic pencils.

This pigment is used extensively in plastics and other applications for its UV resistant properties where it acts as a UV reflector.

In ceramic glazes titanium dioxide acts as an opacifier and seeds crystal formation. In almost every sunscreen with a physical blocker, titanium dioxide is found both because of its refractive index and its resistance to discolouration under ultraviolet light. This advantage enhances its stability and ability to protect the skin from ultraviolet light. Sunscreens designed for infants or people with sensitive skin are often based on titanium dioxide and/or zinc oxide, as these mineral UV blockers are less likely to cause skin irritation than chemical UV absorber ingredients, such as avobenzone.

Titanium oxide is also used as a semi-conductor.[2]

As a photocatalyst

Titanium dioxide, particularly in the anatase form, is a photocatalyst under ultraviolet light. Recently it has been found that titanium dioxide, when spiked with nitrogen ions, is also a photocatalyst under visible light. The strong oxidative potential of the positive holes oxidizes water to create hydroxyl radicals. It can also oxidize oxygen or organic materials directly. Titanium dioxide is thus added to paints, cements, windows, tiles, or other products for sterilizing, deodorizing and anti-fouling properties and is also used as a hydrolysis catalyst. It is also used in the Graetzel cell, a type of chemical solar cell.

Titanium dioxide has potential for use in energy production: as a photocatalyst, it can

  1. carry out hydrolysis; i.e., break water into hydrogen and oxygen. Were the hydrogen collected, it could be used as a fuel. The efficiency of this process can be greatly improved by doping the oxide with carbon, as described in "Carbon-doped titanium dioxide is an effective photocatalyst" [1].
  2. produce electricity when in nanoparticle form. Research suggests that by using these nanoparticles to form the pixels of a screen, they generate electricity when transparent and under the influence of light. If subjected to electricity on the other hand, the nanoparticles blacken, forming the basic characteristics of a LCD screen. According to creator Zoran Radivojevic, Nokia has already built a functional 200-by-200-pixel monochromatic screen which is energetically self-sufficient.

As TiO2 is exposed to UV light, it becomes increasingly hydrophilic; thus, it can be used for anti-fogging coatings or self-cleaning windows. TiO2 incorporated into outdoor building materials, such as paving stones in noxer blocks, can substantially reduce concentrations of airborne pollutants such as volatile organic compounds and nitrogen oxides.

For wastewater remediation

TiO2 offers great potential as an industrial technology for detoxification or remediation of wastewater due to several factors.

  1. The process occurs under ambient conditions.
  2. The formation of photocyclized intermediate products, unlike direct photolysis techniques, is avoided.
  3. Oxidation of the substrates to CO2 is complete.
  4. The photocatalyst is inexpensive and has a high turnover.
  5. TiO2 can be supported on suitable reactor substrates.

Other applications

It is also used in resistance-type lambda probes (a type of oxygen sensor).

Titanium dioxide is what allows osseointegration between an artificial medical implant and bone.

Titanium dioxide in solution or suspension can be used to cleave protein that contains the amino acid proline at the site where proline is present. This breakthrough in cost-effective protein splitting took place at ASU in 2006.[3]

Titanium dioxide on silica is being developed as a form of odor control in cat litter. The purchased photocatalyst is vastly cheaper than the purchased silica beads, per usage, and prolongs their effective odor-eliminating life substantially.

The Pilkington Activ glass has a special nano-scale, extremely thin hydrophobic coating of microcrystalline titanium oxide which catalyses the break-down of organic surface contamination by ultraviolet light from the sun. [2]

Historical uses

The Vinland map, the map of America ("Vinland") that was supposedly drawn during mid-15th century based on data from the Viking Age, has been declared a forgery on the basis that the ink on it contains traces of the TiO2-form anatase; TiO2 was not synthetically produced before the 1920s. Recently (1992) a counter-claim has been made that the compound can be formed from ancient ink.

Titanium dioxide white paint was used to paint the Saturn V rocket, which is so far the only rocket that has sent astronauts to the moon. In 2002, a spectral analysis of J002E3, a celestial object, showed that it had titanium dioxide on it, giving evidence it may be a Saturn V S-IVB.

See also

  • Noxer, a building material incorporating TiO2.

References

External links

Information provided by Wikipedia, the free encyclopedia (http://en.wikipedia.org/wiki/Titanium_dioxide)

BIO SHIELD, INC.

6230 Stone Road, Suite O
Port Richey, Florida 34668
1 (727) 375-4985


Not Sold To The Public


Become a Dealer
NOW ONLY
$2,995.95 Compleate


Real World Test Video



ADVANTAGES

  • No Contracts
  • No Supply Chain Interruptions
  • No Territorial Restrictions
  • Factory Direct Pricing
  • FREE Private Label Agreement
  • Product Shipped in 48 Hours or its FREE!

    COVERAGE:
    ą5,000 sq. ft. per liter is easily achieved if properly applied with a factory adjusted FM-5330 electric application unit.

    LONGEVITY:
    NuTiOŽNatural is semi-permanent and should outlast almost any sub straight if properly installed and maintained.

    CURE TIME:
    Dries to the touch in a few minutes and to final 6H hardness with in 8 to 24 hours. Dry times very due to humidity, temperature and application thickness.

    SHELF LIFE:
    Up to 18 months stored in a dark climate controlled environment. Do not freeze or expose to light prior to use.

    TESTING:
    The NuTiOŽ products have passed extensive real world and 3rd party laboratory testing and have proven up to 99.9% effective at reducing T-VOC, M-VOC and 99.7% effective against the highly resistant spore forming organism "bacillus subtils" so we can scientifically guarantee similar or greater reductions on all less resistant bacteria. i.e. MRSA, S. Aureus, E. Coli, Salmonella, airborne viruses, all influenza types (flu), including H1N1 Swine Flu, N5H8, H5N1 Avian Flu and Hepatitis A.

    WARRANTY:
    All products are 100% guaranteed against defects. In the unlikely event of a issue we will replace the product with in 72 hours at no charge.


    Starter Package

     Includes

  • Binding Base Coat "Primer"
  • 2.89% Any Light Activated Nano TiO2 Top Coating
  • FM-5330 Factory Pre-Set Atomizing Sprayer (110v)
  • Installation Instruction Video

ONLY
$424.95 + Shipping


Specialty Product

Windows, Mirrors, Solar Panels and Computer Monitors
(No Light Required)

Spray on, wipe in formula
 

 


Bio Shield, Inc.
6230 Stone Road
Suite O

Port Richey Florida 34668

1 (727) 375-4985

Our UV-PCO Green technology is known by many names here are just a few:
Photocatalytic TiO2, Nanotechnology, UV-PCO,  Self-Cleaning Coatings, Nano TiO2 Photocatalyst Coating, TiO2 photocatalyst air freshened, Bactericidal Activity of Photocatalytic TiO2, Super-Hydrophilic photocatalyst, cleans the  environment with nano TiO2 photocatalyst, TiO2 titanium dioxide, self-cleaning nano coatings, advanced green  nanotechnology, ultra violate photocatalytic oxidizing, titania, hygiene, hygienic surfaces, Swine Flue H1N1 Protection, Photocatalysis, TiO2 MSDS, TiO2 Solar Cells, TiO2 Manufacturers, Bio Film Reduction, Bio Shield, Inc. also manufacturers, Eco Products and Technology.



BIO SHIELD PRODUCTS ARE NOT SOLD TO THE GENERAL PUBLIC.

Full Disclosure Statement:

Bio Shield, Inc. and/or any of our certified applicators can not make any expressed, written or implied "kill" claims on The Bio Shield Brand of Products. The Bio Shield Manufacturing Company is in full compliance with all governing laws and US EPA and FIFRA regulations. The Bio Shield families of products are not pesticides and are intended to provide protection to the sub-straits and surfaces treated only. The Bio Shield brand coatings are not sold to the general public and must be applied by a Bio Shield, Inc. certified applicator. See MSDS Sheets for more information.

 

Copyrighted 1998 - 2010  Bio Shield, Inc.